Bausch & Lomb - PureVision Multi-Focal
  • 36% Water content
  • 14.0mm Lens diameter
  • Multi-focal
  • For dry eyes

PureVision Multi-Focal Monthly disposable contact lens

  • Sharp focus near and far for 30 days and nights
  • Water content: 36%
  • Oxygen permeability: 110Dk/t
  • Lens diameter: 14mm
  • Base curve: 8.7
  • Powers available:
    Sphere: +6.00D to -10.00D in grades of 0.25D
    Addition: Low: +0.75 to +1.25D, High +1.75 to +2.25D
  • Usage instructions: monthly lenses for extended wear

High-end multi-focal contact lenses for up to 30 days continuous wear.

Since their release in 2006, PureVision Multi-Focal has quickly become one of the most popular multi-focal lens brands worldwide. Multi-focal contact lenses can replace varifocal glasses, or long distance and reading glasses in cases of presbyopia connected to short- or far-sightedness. The specially engineered material of the PureVision Multi-Focal originated in the PureVision Spheric lens. You can wear PureVision Multi-Focal lenses, with the consent of your eye doctor or optician, for up to 30 days and 29 nights continuously.

This is made possible by the introduction of the specially developed silicone-hydrogel balafilcon A. this material maximises the replacement of tear fluid, so that the eye is always supplied with sufficient oxygen. The low water content reduces drying out of the eyes and enables effortless wearing of PureVision Multi-Focal contact lenses without irritation or dry eyes.

The low maintenance required for PureVision Multi-Focal lenses is liberating for the wearer. The design of PureVision Multi-Focals reduces lack of focus and distortion in the field of vision. The ability to wear the lenses day and night, will spare you the daily bother of inserting and removing lenses and free you from cleaning and care problems.

Discover the great savings on offer when you order multiple packs of PureVision Multifocal contact lenses in the Mister Spex online store.

Please note

Mister Spex advises all online purchasers of PureVision Multi-focal contact lenses: the contact lenses, PureVision Multi-focal, should always be fitted to your eyes by an eye doctor or optician. The period between fittings, unless otherwise prescribed by an eye doctor or optician, should not exceed 6 months. You should go for regular check-ups. The manufacturer Bausch & Lomb/your eye doctor/optician's recommended wearing time for PureVision Multi-focal contact lenses should be followed strictly. It is your own personal responsibility to make yourself aware of the care instructions for PureVision Multi-focal contact lenses and to follow them accordingly. In case of eye irritation or visual impairments caused by PureVision Multi-focal, remove the contact lenses immediately and consult an eye doctor or optician. Damaged contact lenses should be replaced immediately.

Failure to comply with these safety precautions can cause permanent damage to your eyes and vision.

Mister Spex offers you a 30-day money back guarantee on all the products in the online store.


Here you can find more PureVision contact lenses.
Discover contact lenses from other brands in our online store!
To the Mister Spex homepage.

Product number: 0109-3210-101

Bausch & Lomb
Bausch & Lomb
PureVision Multi-Focal

  • More than 130 products from the top brands
  • Friendly and qualified customer service
  • 100% satisfaction or money back

Prescription details Hilfe

Please enter the values for your contact lenses. You can find these on your prescription form or your last contact lenses packet.

Correction values for contact lenses
8.60
14.00
Single eye correction values

If you select more than one packet, you can enter your correction values for both eyes.

Definitions

  1. Your prescription details are the results of your last eye test. They comprise the following values: sphere (Sph), cylinder (Cyl), axis (A) and addition power (ADD). On all prescriptions you will find a sphere value. If you have astigmatism, you will also find values for cyl and A. Multi-focal lenses for presbyopia have an addition power (ADD).
  2. The term base curve refers to the curvature of the inside surface of the contact lens. Larger base curves provide a looser fit to your cornea. Smaller (or "steeper") base curves provide a tighter fit.
  3. The diameter of a contact lens refers to the size of the lens, from one side to the other. Smaller eyes will need smaller lenses, and larger eyes need lenses with a larger diameter.
  4. The colour of your lenses.
  5. The sphere is the basic strength of your contact lenses, measured in dioptres (D). If a plus value is indicated, then you are far-sighted. A minus value indicates short-sightedness.
  6. Where a corneal astigmatism is present, cylinder value refers to the strength required to correct said astigmatism. It is measured in dioptres and can be a negative (short-sighted) or positive (far-sighted) value.
  7. The axis value states the direction of the corneal astigmatism (irregular curvature of the cornea). It is measured in degrees from 0 to 180.
  8. An addition power is found on prescriptions for presbyopia. It refers to the additional strength required for near vision. It can be a a +/- diopritic value (distant R/L: -2.00D and Add. R/L: +2.00D), but also an ascending valule(distant R/L: +2.00D and Add. R/L: +2.00D - +4.00D).
  • £58.16 €69.90
  • incl. 19% VAT
Join Mister Spex on Facebook and accept the transmission of your data.
When you slide this button to join our Facebook community information is sent to Facebook in the USA and possibly saved up.

The indicated price of pound is based on www.xe.com of 16 March 2012, 08:32 PM. We accept no liability for exchange rate fluctuations.

Mister Spex newsletter

Keep up to date with special offers and trends! Subscribe now to receive a 10% voucher.

Secure shopping and payment

An encrypted connection and multiple payment methods – secure online shopping.

Payment methods Paypal

Shipping

Fast shipping within Europe with DHL.

DHL